How screenprinting works
A fine polyester mesh is stretched tight across a frame and coated with a light-sensitive emulsion. The artist's design, printed as solid black on clear film, is laid against the screen and exposed to light. Where the film blocks the light, the emulsion stays soft and washes out with water, leaving open mesh in the shape of the design.
The screen is set face-down on a sheet of paper, ink is spread along one end, and a rubber squeegee pulls it across the mesh in a single firm stroke. Ink passes through the open areas and onto the paper. Lift the screen, take the print to a drying rack, lay down a fresh sheet, repeat. Every colour needs its own screen, carefully registered to the last, and every sheet of the edition goes through every pass by hand.
Screenprint, silkscreen and serigraph all describe this same process. "Serigraph" was coined in the mid-twentieth century to distinguish fine-art screenprints from commercial sign work, and galleries still use it.
What to look for in a screenprint
- Flat, opaque colour. Screen inks are thick and dense. A good screenprint has solid areas with no grain or dot pattern at all.
- Ink on the surface. Tilt the print against the light and you can often see each colour as a very slightly raised layer, and the order the layers went down.
- Crisp edges. Shapes are cleanly cut. Halftones, where used, are usually visible and deliberate.
- Small honest variations. A hairline gap or overlap between colours, a touch of uneven coverage at the end of a stroke. Hand-pulled editions are consistent but not machine-identical.
Because each colour is a separate pass, a seven-colour screenprint is seven times the work of a one-colour print. That is reflected in the price, and it is part of what makes a big multi-layer edition impressive. See how screenprint compares with risograph and other methods in our printmaking field guide.
Joining a screen printing studio
Screenprinting needs more room and kit than it first appears: an exposure unit, a washout booth with a pressure washer, a darkroom or safe-light area for coating screens, drying racks and somewhere to reclaim screens afterwards. That is why most people learn and print at a community print studio rather than at home.
The usual path is an introductory course - often a weekend - which covers coating, exposing, registration and printing, and doubles as the studio's safety induction. After that, members book time on the beds, pay for screens or emulsion, and bring their own paper or fabric. Most community studios now use water-based inks, which clean up without harsh solvents.
Subscribing to a screenprint club
Screenprint clubs tend to send larger formats than riso or postcard clubs - A3, 11×14" and up - and smaller, often signed and numbered editions, reflecting the labour involved. Check the size before you join if you plan to frame everything; our framing guide lists matching frame sizes.
Screenprinting also has deep roots in political and protest printing, from poster workshops to community print shops. If that is what draws you, our politics and protest rankings are the place to start.