Print Club Society
Sign inSubmit a club
Care Guide· 9 min

How to store, mount and frame the prints your club sends.

A monthly print club adds a dozen works on paper to your home every year. Paper is tougher than it looks, but it has a few enemies - tape, sunlight, damp and cheap card. Here is how to keep a growing collection flat, clean and on the wall.

Updated
By
The editors of Print Club Society

In this guide
  1. Opening the envelope
  2. Storing the prints that aren't on the wall
  3. Frame sizes for common print sizes
  4. Mounting a print without damaging it
  5. Mats, glass and acrylic
  6. Light, heat and where to hang
  7. When something goes wrong

Opening the envelope

If the parcel has been sitting in a cold van or a damp porch, let it come up to room temperature for an hour before opening it. Then open it on a clean, dry, flat surface, slide the print out with its backing board, and handle it by the edges with clean, dry hands.

Keep the backing board and the sleeve. They are the right size and, from a good club, the right materials for storage. And keep the note that came with it - it is the print's provenance.

Take extra care with risograph prints. Riso ink is oil-based and stays soft on the surface for longer than you would expect, so a fingertip or a neighbouring print can smudge it. Do not rub, stack face to face, or slide one riso print across another.

Storing the prints that aren't on the wall

Most of any collection lives in a drawer. A few rules keep it safe there:

  • Store flat. Rolling is fine for posting, but prints stored rolled for months take a long time to relax and can crack along the curve.
  • Use acid-free, lignin-free materials. An archival box or a portfolio case is the simplest solution. Ordinary cardboard and wood-pulp folders turn acidic and yellow the paper they touch.
  • Interleave. Put a sheet of acid-free tissue between prints so ink and paper never touch ink and paper. Glassine is fine for short-term interleaving and for posting.
  • Choose the right plastic. Sleeves made of polyester (sold as Mylar or Melinex) or polypropylene are safe. Avoid PVC, which gives off acids as it ages - if a sleeve smells strongly of plastic, do not use it.
  • Pick a stable room. Not the loft, not the basement, and not against a cold outside wall. Paper is happiest at ordinary room temperature and moderate humidity - roughly 40 to 55 percent - and dislikes rapid swings more than anything.
  • Label the box, not the print. If you must write on a print, use a soft pencil, lightly, on the back.

Frame sizes for common print sizes

Most print clubs send one of a handful of standard sizes, which means ready-made frames usually fit. A print almost always looks better with a mat (a card border) around it, so buy the frame one size up and order or cut a mat with a window slightly smaller than the image.

Print sizeDimensionsFrame with a mat
Postcard / A6105 × 148 mm (about 4 × 6")5 × 7" or 8 × 10"
A5148 × 210 mmA4 or 8 × 10"
8 × 10"203 × 254 mm11 × 14"
A4210 × 297 mmA3 or 12 × 16"
11 × 14"279 × 356 mm16 × 20"
A3297 × 420 mm40 × 50 cm or 16 × 20"
18 × 24"457 × 610 mm24 × 30" or 50 × 70 cm

Measure the print itself before you buy - hand-cut and hand-torn papers vary by a few millimetres. A mat window normally overlaps the image by 3 to 5 mm on each side so the paper edge never shows. If the paper has a beautiful torn or deckled edge, ask a framer to float-mount it instead, so the whole sheet sits visible on the mat.

Mounting a print without damaging it

The single most common way prints are ruined is tape. Masking tape, sticky tape and spray glue all discolour, and they cannot be removed without tearing or staining the paper. Do not use them anywhere near a print.

What framers and conservators use instead:

  • Hinges. Small strips of Japanese tissue attached with wheat starch paste, or a pre-gummed archival linen or paper hinging tape. Two hinges at the top edge let the print hang naturally and expand and contract with the seasons.
  • Photo corners. Archival paper or polyester corners hold the print at its corners with no adhesive touching it at all. The easiest option to do at home.

Never dry-mount (glue down flat) an original print. It is permanent, and it destroys most of the print's value and some of its life.

Mats, glass and acrylic

The mat does two jobs: it frames the image, and it holds the print away from the glass. A print pressed directly against glazing can stick to it in damp weather, so if you skip the mat, use spacers inside the frame. Choose an acid-free mat board - often sold as conservation or museum board - and an acid-free backing board behind the print.

For the glazing itself:

  • UV-filtering glass or acrylic is the best upgrade you can buy. It blocks most of the ultraviolet light that fades ink and yellows paper.
  • Acrylic is lighter and will not shatter - good for large frames, children's rooms and anything you might post. It scratches more easily, so clean it with a soft cloth and an acrylic cleaner, not glass spray.
  • Anti-reflective glazing costs more but makes a dramatic difference for dark prints and rooms with windows opposite the wall.

Light, heat and where to hang

Light is cumulative and irreversible. The damage from a sunny wall adds up quietly over years. Hang prints out of direct sun, and be most careful with:

  • Fluorescent inks. Riso fluorescent pink and the neon inks some screenprinters use are beautiful and notoriously quick to fade. Give them UV-filtering glazing and a wall that never sees the sun.
  • Coloured and thin papers, which fade and yellow faster than heavy white cotton paper.

Avoid walls above radiators and fireplaces, kitchens and bathrooms. And consider rotating. A picture ledge or a simple hanging rail with clips makes it easy to change what is up each month - which suits a print club far better than hanging everything at once.

When something goes wrong

  • Waves and ripples (cockling) usually come from humidity changes. They often relax on their own once the print is stored flat in a stable room. Do not iron a print.
  • Brown spots (foxing), mould or a stuck-down print are jobs for a paper conservator, not for home remedies.
  • A print that arrived damaged should go back to the club. Photograph it in its packaging and write to them - every good club will replace it or help.

A well-framed print on a sensible wall will outlast all of us. It is worth the little extra care, and it is part of what makes a print club collection a collection rather than a stack.

Questions readers ask

Quick answers.

How should I store unframed art prints?
Store them flat in an acid-free archival box or portfolio, with a sheet of acid-free tissue between each print, in a room with stable temperature and moderate humidity. Avoid lofts, basements, PVC sleeves and ordinary cardboard.
What size frame do I need for an A4 print?
An A4 print (210 × 297 mm) fits an A4 frame edge to edge, but looks better in an A3 or 12 × 16 inch frame with a mat whose window is slightly smaller than the image.
How do I stop prints from fading?
Keep them out of direct sunlight and frame them behind UV-filtering glass or acrylic. Fluorescent inks, such as risograph fluorescent pink, fade fastest and need the most protection.
Can I use tape to hang a print?
No. Masking tape, sticky tape and spray adhesives stain paper and can't be removed safely. Use archival hinging tape, Japanese tissue hinges with wheat starch paste, or archival photo corners.
Is it OK to store prints rolled?
Briefly, for posting. For long-term storage keep prints flat - prints left rolled for months resist flattening and can crack or crease along the curve.
More guides

Keep reading.

All guides →