What relief printing is
In a relief print, the image is the part of the block that stands up. The artist draws a design onto a block, then carves away everything that should print white, leaving the lines and shapes standing proud. Ink is rolled across the surface with a brayer, a sheet of paper is laid on top, and pressure transfers the ink - either from a press, or by hand with a baren (a flat, smooth disc) or the back of a wooden spoon.
Because the block is carved as a mirror image, lettering has to be cut backwards. And because every mark is cut by hand, relief prints carry the artist's gesture more directly than almost any other technique.
Linocut, woodcut and wood engraving
- Linocut is carved from linoleum - linseed oil, cork and wood flour on a hessian backing. It has no grain, cuts smoothly in every direction, and holds bold shapes and confident lines. Softer vinyl blocks are popular with beginners. Linocut is the most common relief technique in print clubs.
- Woodcut is carved into the side grain of a plank. The grain resists the knife in one direction, which gives woodcuts their energy, and the texture of the timber often prints into solid areas.
- Wood engraving is cut into the end grain of very hard wood, usually boxwood, with fine engraving tools. It allows extremely fine lines and was the illustration technique of Victorian books and newspapers.
- Mokuhanga, the Japanese woodblock tradition, prints water-based pigments by hand with a baren, often from a separate block for each colour, giving soft, luminous colour quite unlike oil-based relief inks.
Reduction prints
Multi-colour relief prints are made in one of two ways. With separate blocks, each colour gets its own carved block, registered so they print in alignment. With the reduction method, popularised by Picasso's linocuts in the late 1950s, a single block is printed in the lightest colour, then carved further and printed again in the next colour over the top, and so on to the darkest.
By the end, most of the block has been cut away. There is no going back to print more - which is why printmakers sometimes call it a "suicide print", and why the size of a reduction edition is fixed the moment the first colour is printed. If a club sends you a reduction linocut, you are holding one of a number that can never be added to.
What to look for
- Gouge marks. The cut texture in background areas, sometimes left deliberately, is the clearest sign of a hand-carved block.
- Speckle in solids. Large inked areas often print with a fine mottle where the paper did not quite meet the ink - printers call it salt. It varies from sheet to sheet.
- Edges with a halo. Under pressure, ink can squeeze very slightly at the edges of shapes.
- Sheet-to-sheet variation. Especially in hand-burnished prints, each impression in the edition is a little different in density. That is the nature of the process.
For how relief compares with screenprint, etching and the rest, see our field guide to printmaking techniques.
Relief print clubs, and learning to carve
Linocut suits a print club well: a block is cheap, an edition can be printed without a large press, and the results are robust enough to post. Many relief clubs are run by a single printmaker who carves a new block each month, often on a nature, botanical or folklore theme - our flora and fauna rankings are full of them.
Relief is also the friendliest technique to learn. Most community studios run linocut introductions that need no experience, and a beginner can carry on at a kitchen table with a few gouges, a roller and a baren. To print bigger or alongside other people, see our guide to joining a printmaking studio.